Characteristics of BGY2-220V/2KW Explosion-Proof Heater - Yangzhou Darui

Characteristics of BGY2-220V/2KW Explosion-Proof Heater - Yangzhou Darui

Darui Electric recommends for you

BGY2-220V/2KW explosion-proof heater is widely used in plastic machinery, molds, cable machinery, alloy die-casting machines, pipelines, chemical, rubber, petroleum and other equipment. The cast aluminum heater uses a tubular electric heating element as the heating body, which is bent and formed, with excellent metal alloy materials as the shell, and is centrifugally cast into various shapes, such as round, flat, right angle, air-cooled, water-cooled and other special shapes. After completion, it can be tightly bonded with the heating body, and the working temperature is between 300-450°C.

BGY2-220V/2KW explosion-proof heater instructions:

1. The working voltage should not exceed 10% of the rated value; the relative humidity of the air should not exceed 95%, and there should be no explosive and corrosive gases.

2. The wiring part should be placed outside the heating layer and insulation layer, and the shell should be effectively grounded; avoid contact with corrosive, explosive media and moisture; the wiring should be able to withstand the temperature of the wiring part and the heating load for a long time; and the wiring screws should be tightened to avoid excessive force.

BGY2-220V/2KW explosion-proof heater advantages:

1. Large heat exchange area, fast heat exchange speed, and high efficiency.

2. Long heating time, pipeline heating, long pipeline, long heating time, and more sufficient heat transfer.

3. Good heat exchange medium, fast heat transfer speed, and fast heat exchange speed.

4. The water channel and pipeline of the cast aluminum heater are surrounded by the entire pipeline. There is no welded connection and no large-area liquid seal to prevent corrosive liquid leakage.

5. The heating element is not affected by moisture and water and electricity are separated.

6. Reduce the heat load of the heating element, reduce scale, and extend service life.

7. Due to the heat generated by the contacts, the terminals of the heating element should be located in the low-temperature zone of the heating body. The terminals should be dispersed to reduce their own heat and ensure safety.

Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.