Features of BGY2 Explosion-Proof Heater - Yangzhou Darui

Features of BGY2 Explosion-Proof Heater - Yangzhou Darui

Darui Electric recommends it for you
Widely used in plastic machinery, molds, cable machinery, alloy die-casting machines, pipelines, chemical, rubber, petroleum and other equipment. Cast aluminum heaters use tubular electric heating elements as the heating body, which are bent into shape, with excellent metal alloy materials as the shell, and are centrifugally cast into various shapes, such as round, flat, right-angle, air-cooled, water-cooled, and other special shapes. After completion, they can be tightly bonded with the heating body, with working temperatures between 300-450°C.

Instructions for using cast aluminum heaters:

1. The working voltage should not exceed 10% of the rated value; the relative humidity of the air should not exceed 95%, and there should be no explosive or corrosive gases.

2. The wiring part should be placed outside the heating layer and insulation layer, and the shell should be effectively grounded; avoid contact with corrosive, explosive media and moisture; the wiring should be able to withstand the temperature and heating load of the wiring part for a long time; and the wiring screws should be tightened to avoid excessive force.

Features of BGY2 Explosion-Proof Heater:

1. Large heat exchange area, fast heat exchange speed, and high efficiency.

2. Long heating time, pipeline heating, long pipeline, long heating time, and more sufficient heat transfer.

3. Good heat exchange medium, fast heat transfer speed, and fast heat exchange speed.

4. The water channels and pipes of the cast aluminum heater are surrounded by the entire pipe. There is no welded connection and no large-area liquid sealing to prevent corrosion liquid leakage.

5. The heating element is not affected by moisture and water and electricity are separated.

6. Reduce the heat load of the heating element, reduce scaling, and extend service life.

7. Due to the heat generated by the contacts, the terminals of the heating element should be placed in the low-temperature zone of the heating body. The terminals should be dispersed to reduce their own heat and ensure safety.

Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.