Melt-blown Parameters Ceramic Heater
Melt-blown Parameters Ceramic Heater
High working temperature, fast heating, high thermal efficiency, uniform and accurate heating, long service life of ceramic electric heating coils, easy installation and maintenance, low operating costs, etc. Supply 3W melt-blown fabric ceramic heater
Precautions:
1.Melt-blown Parameters Ceramic Heater Ceramic electric heaters are not waterproof structures, so avoid contact with oil, water, and plastic pellets during storage and installation to prevent electric leakage.
2. During installation, the ceramic electric heater must be tightly attached to the heated object, and the surface of the heated body should be flat and complete without any unevenness.
3. If a scorched black color is found on the surface after use, it indicates an imbalance in heat dissipation between the heating element and the heated body. Adjust it promptly to prevent burn-through.
4. When using high-temperature ceramic electric heaters, avoid forceful impact or collision with hard objects that may cause tile breakage, exposing the alloy resistance wire and affecting operational lifespan.
5. Before installation, check whether the installation position matches the specifications of the ceramic electric heater and whether the operating voltage is consistent.
Usage Precautions
.Fast heat transfer, uniform heating, and stable operation.
2. No heat leakage, saving electricity; the outer cover is not hot to the touch, ensuring safe operation.
3. High power output; using ceramic strip threading method, the power is 0.5 to 1.5 times higher than ordinary ones.
4. High-temperature resistant heating wire features fast heat dissipation, uniform heating, and high-temperature stability, suitable for long-term use at 600-800°C.
5. Long product lifespan due to slow aging of raw materials at high temperatures.
6. Complies with national GB technical requirements, power deviation +5% to -10%.
7. Electrical strength: withstands 1500V/50Hz sinusoidal AC voltage test for 1 minute without breakdown.
8. High mechanical strength, good hot insulation performance, large contact area with the heated object, and long service life.
9. Easy installation and maintenance, low operating costs; even if the internal heating material is damaged, the external ceramic components can still be reused.
10. Emits far-infrared and radiant heat with an emissivity of up to 91%, which is 1.5 times that of PTC heaters.
1. High-temperature ceramic heaters are not waterproof structures, so avoid contact with oil, water, and plastic pellets during storage and installation to prevent electric leakage.
2. During installation, the high-temperature ceramic heater must be tightly attached to the heated object, and the surface of the heated body should be flat and complete without any unevenness.
3. If a scorched black color is found on the surface of the high-temperature ceramic heater after use, it indicates an imbalance in heat dissipation between the heating element and the heated body. Adjust it promptly to prevent burn-through.
4. When using high-temperature ceramic heaters, avoid forceful impact or collision with hard objects that may cause tile breakage, exposing the alloy resistance wire and affecting operational lifespan.Melt-blown Parameters Ceramic Heater
5. Before installation, check whether the installation position matches the specifications of the high-temperature ceramic heater and whether the operating voltage is consistent.
