Nonwoven Fabric Heater Portable
Function Description:
Working voltage allowable error: not greater than 1.1 times its rated value, the shell should be effectively grounded.
Working environment: relative humidity not greater than 95%, no explosive and corrosive gases.
In the dimension drawing, "B" must be fully immersed in oil (and checked regularly) to avoid burning out. The heated oil should be non-corrosive. When melting solid oils such as asphalt and paraffin, reduce the voltage, and after melting, raise to the rated voltage. Prevent heat concentration to reduce the service life of the element. Keep the outlet end dry and clean to avoid surface flashover or short circuit. The element should be stored in a dry place. If the insulation resistance drops below 1MΩ due to long-term storage, it can be dried in an oven at about 200°C for several hours (or apply low voltage to the element for several hours) to restore insulation resistance.
Precautions:
1. In the dimension drawing, dimension "B" must be fully immersed in oil to avoid burning out the component. The heated oil should be non-corrosive.
2. When melting solid oils such as asphalt and paraffin, reduce the voltage, and after melting, raise to the rated voltage. Prevent heat concentration to reduce the service life of the component.
3. If carbon deposits are found on the tube surface, they must be removed before use to avoid reducing efficiency or even burning out the component.
4. The component should be stored in a dry place. If the insulation resistance drops below 1 megohm due to long-term storage, it can be dried in an oven at about 200°C for several hours (or apply low voltage to the component for several hours) to restore insulation resistance.
1. Small size, high power: The heater mainly uses clustered tubular electric heating elements.
2. Fast thermal response, high temperature control accuracy, and high overall thermal efficiency.
3. High heating temperature: The maximum working temperature of the heater design can reach 850°C.
4. Uniform medium outlet temperature and high temperature control accuracy.
5. Wide application range and strong adaptability: This heater can be applied to explosion-proof or ordinary occasions, with explosion-proof levels up to dⅡB and C, and pressure resistance up to 20MPa.
6. Long life and high reliability: The heater is made of special electric heating materials, with low design surface power load and multiple protections, greatly increasing the safety and service life of the electric heater.
7. Fully automated control: According to requirements, through the heater circuit design, automatic control of outlet temperature, flow, pressure and other parameters can be easily achieved, and it can be networked with computers.
8. Significant energy saving effect: The heat generated by electricity is almost entirely transferred to the heating medium.
Nonwoven Fabric Heater Portable
