Melt-blown Ceramic Heater Manufacturer
The built-in melt-blown fabric ceramic heater uses stainless steel as the outer shell, with high insulation and fire-resistant ceramics inside, threaded with resistance wire, and then mechanically twisted into shape. Once connected to power, it is ready to use.
Product Structure: The ceramic heater uses stainless steel as the outer shell, with high insulation and fire-resistant ceramics inside, threaded with resistance wire, and then mechanically twisted into shape. Once connected to power, it is ready to use.Melt-blown Ceramic Heater Manufacturer
*Heats up quickly, reaching 500 degrees in 30 seconds
*Thermal efficiency over 90%, 1.5 times that of PTC heaters
*Power can range from 50W to 2000W arbitrarily
*Power supply from 12V to 380V arbitrarily
*Shape is not limited by external form (customizable)
*Uses new foreign technology of honeycomb ceramic heating elements
*Not afraid of water, acid, or alkali
*Uses ceramic plate heating, no red glow, no combustion, fast heating, can rise to 500°C within 30 seconds.
*Below 500°C, no open flame, no oxygen consumption, no oxidation, mouth and tongue not dry, can deodorize and keep indoor air fresh.
*Thermal efficiency can reach over 90%, 1.5 times that of PTC heaters, 2 times that of traditional electric wire heaters, saving 30% energy and electricity costs.
*Can emit far-infrared and radiant heat, with emissivity as high as 91%.
*Does not burst when exposed to water, resistant to acid and alkali, suitable for harsh environments.
*No surge current at startup, temperature can be kept constant.
*Ceramic heaters are suitable for: makeup, facial masks, relief of rheumatism, joint soreness. Besides warming the room, they are also excellent for warming cold feet and relieving soreness for office workers and practitioners.
*Operating voltage 12V-380V arbitrary, power 50W-2000W arbitrary.
Advantages
1. Fast heat transfer, uniform heating, stable operation.
2. Temperature does not leak, saves electricity, outer cover is not hot to the touch, safe operation.
3. High product power, using ceramic strip threading method, power is 0.5~1.5 times higher than ordinary ones.
4. European and American high-temperature heating wire, with fast heat dissipation, uniform heating, high-temperature stability, can be used for a long time at 600-800°C. 5. Long product life, because raw materials age slowly at high temperatures, so product life is long.
6. Meets national GB technical requirements. Power deviation +5% to -10%.
7. Electric strength: tested with 1500V/50Hz sinusoidal AC voltage, no breakdown for 1 minute.
8. High mechanical strength, good hot insulation performance, large contact area with heated objects, long service life.Melt-blown Ceramic Heater Manufacturer
9. Easy installation and maintenance, low operating cost, even if the internal heating material is damaged, the external ceramic parts can still be reused.
