Melt-blown High-quality Ceramic Heater Manufacturer
The melt-blown fabric ceramic heater is built with a stainless steel shell, inside which ceramic with high insulation and fire resistance is threaded with resistance wire, then mechanically twisted into shape. It is ready to use once connected to power.
Melt-blown High-quality Ceramic Heater Manufacturer is suitable for plastic injection molding machines, chemical industry, barrel heating devices of extruders, and various pipeline heating. The ceramic electric heating ring has an attractive appearance, stable performance, corrosion resistance, fast heating, uniform heat dissipation, good insulation performance, and high voltage resistance. The ceramic electric heating ring has high working temperature, fast heating rate, high thermal efficiency, uniform and accurate heating, long service life, easy installation and maintenance, and low operating costs.
The inner tank of the air electric heater is made of 304 stainless steel, and the heating element is a stainless steel electric heating tube. The flange heater is equipped with multiple baffles to extend the residence time of air in the heater cavity, thereby improving heat exchange efficiency. According to the required air flow and temperature, the heating power is reasonably designed. If conditions permit, appropriately increasing the heating power of the air heater can shorten the preheating and heating-up time of the production line.
Product Structure:
It is made with a stainless steel shell, inside which ceramic with high insulation and fire resistance is threaded with resistance wire, then mechanically twisted into shape. It is ready to use once connected to power.
Product Parameters:
*Fast heating: reaches 500°C in 30 seconds
*Thermal efficiency above 90%, 1.5 times that of PTC heaters
*Power can be arbitrarily set from 50W to 2000W
*Power supply can be arbitrarily set from 12V to 380V
*Shape is not limited by appearance (customizable)
*Uses new foreign technology of honeycomb ceramic heating elements
*Not afraid of water, acid, or alkali
*Uses ceramic plate heating, no red glow, no combustion, fast heating, can rise to 500°C within 30 seconds.
*Below 500°C, no open flame, no oxygen consumption, no oxidation, mouth and tongue not dry, can deodorize and keep indoor air fresh.
*Thermal efficiency can reach above 90%, 1.5 times that of PTC heaters, and 2 times that of traditional electric wire heaters, saving 30% on energy and electricity costs.
*Can emit far-infrared and radiant heat, with an emissivity as high as 91%.
*Does not burst when exposed to water, resistant to acid and alkali, suitable for harsh environments.
*No surge current at startup, temperature can be kept constant.
*Ceramic heaters are suitable for: makeup, facial masks, rheumatism, and relief of joint soreness. Besides warming the room, they are also excellent for warming cold and aching feet of office workers and practitioners.Melt-blown High-quality Ceramic Heater Manufacturer
*Operating voltage 12V-380V arbitrary, power 50W-2000W arbitrary.
