Desktop|中文
Home About Us Products + News Center Technical Articles Messages Contact Us

Product Details

全自动Dielectric Loss Tester-扬州达瑞

HRY8 380V 6KW Sheathed Stainless Steel Electric Heater - Yangzhou Darui Co., Ltd.

Published: 2020-07-01 09:32:36

Views: 2922

Category: Sheath Heater

Product Description
HRY8 380V 6KW Sheathed Stainless Steel Electric Heater



HRY8 380V 6KW Sheathed Stainless Steel Electric Heater, the heater has a large contact area with the heated oil, low surface power, no carbon deposition, and the oil will not be locally overheated and carbonized. It has a long service life, is safe and reliable.

Detailed Introduction



Product Features:



The electric heater consists of a heating core and a sheath. The heating core uses high-temperature resistant alloy electric heating wire as the heat source, high-temperature resistant ceramic as the insulating medium, and the sheath is made of cold-drawn seamless steel pipe or stainless steel.



The electric heater is connected to the oil tank body by flange. The sheath separates the heating core from the heated oil.



Dimension Features:



1. It consists of a heating core and a sheath tube. The heating core uses a tubular electric heating element as the heat source, and the sheath tube is made of thin stainless steel. It has a large heat dissipation area and fast heat transfer. The terminal device part is divided into ordinary type (using iron drawn cup-shaped housing) and special type (using bolted flameproof device housing sealed), the special type meets the requirements of explosion-proof mark dIICT4 and protection level IP65 series standards.



2. It is connected to the oil tank container body by flange. The sheath separates the heating core from the heated oil. When repairing the electric heater, there is no need to drain the oil in the tank; just pull out the heating core and replace it with a new one, which is convenient for maintenance.



3. When designing, the contact area between the sheath and the heated oil should be considered to prevent local carbonization of the oil due to excessive heating temperature. This type of heater is only suitable for heating heat transfer oil or oils with good heat reception effects and media.



It consists of a heating core and a sheath. The heating core uses high-temperature resistant alloy electric heating wire as the heat source, high-temperature resistant ceramic as the insulating medium, and the sheath is made of cold-drawn seamless steel pipe or stainless steel.



The wind power sheathed electric heater SRY6-2 is used for heating hydraulic oil and lubricating oil in hydraulic and lubrication devices, and can also be used for heating non-corrosive gases or liquids.



Keywords: HRY8 380V 6KW Sheathed Stainless Steel Electric Heater, HRY8 380V 6KW Sheathed Stainless Steel Electric Heater







 


WeChat QR Code
💬
💬 Message

Hello! Have you found what you need? Contact us directly online!

Leave a Message for Consultation
Yangzhou Darui Electric Co., Ltd.
主营产品:Dielectric Loss Tester、Transformer Ratio测试仪、Loop Resistance Tester、高压None线核相仪、Insulation Resistance Tester、Partial Discharge Tester、Cable Fault Tester、DC Resistance Tester等。
☎ Phone: 18952707000(关经理)📞 Landline: 0514-88770377✉ Email: 195214804@qq.com
Verification Code
By submitting, you agree to ourTerms of ServiceandPrivacy Policy
🏠 网站Home📞 一键拨号✉ Contact Us